Hypertherm Phoenix 8.0 - Manual (Page 17)

9
Overview
The following sections highlight the features of the Hypertherm Automation CNC and version
8.0 of the Phoenix
® software.
CutPro Wizard
The CutPro ™ wizard is an interactive tool that simplifies the steps of cutting a part. The CutPro
wizard helps you:
• Load a part program
• Select a cut process
• Align a plate and adjust for skew
• Set scrap clearance
• Select cut mode
• Start the cut directly from the wizard or by pressing the green Start button on the console
The wizard opens automatically from the Main screen after 10 seconds. Automatic activation
can be disabled on the Special password setup screen. However, the wizard is always
accessible by pressing the CutPro Wizard soft key on the Main screen.
Align Wizard
The Align ™ wizard is an interactive tool that guides you through the process of aligning a plate
and adjusting for a skewed plate. This wizard can be accessed from the CutPro Wizard or from
the Align screen.
Remote Help
The Remote Help ™ facility is an easy-to-use and reliable means of remotely connecting the
Hypertherm Automation CNC to up to 15 users for:
• Observing an operator at the machine
• Reviewing settings and software configurations
• Transferring setup files, part programs, software updates, etc.
• Performing HPR diagnostics
• Training users
ShapeWizard
The ShapeWizard ® tool allows you to graphically create simple part programs and store them
on the internal hard disk present in the control.
Teach/Trace