Hypertherm Phoenix 8.0 - Manual (Page 431)

Sensor THC
424
THC Speeds
THC Acceleration Rate
This parameter allows the operator to set the acceleration rate for smooth and stable
movement of the Sensor Torch Height Control. The higher the acceleration rate, the
quicker the THC will get up to speed. The lower the acceleration rate, the smoother the
machine will position the cutting device. Values are entered in milliGs.
Maximum THC Speed
Enter the maximum speed for the Sensor THC movement in inches/millimeters per
minute.
THC Jog Speed
Enter a value for the desired THC jog speed.
THC Home/Fast IHS Speed
The THC Home/Fast IHS Speed entered here is used to home the torch at the top of the
slide and to quickly maneuver the torch from the selected IHS height to the plate.