Hypertherm Phoenix 8.0 - Manual (Page 393)

Password Setups
386
User Level
Select the user experience level. The level you select determines view screens and the
features that are available. For example, the intermediate level provides a larger preview
area and an ALT soft key to access additional screens.
Motion Cursor
Select the style of the Motion Cursor.
File Extensions
Enter the file extensions of the part files that will be accepted at the control.
Adding Folders
Select whether the CNC operator can add folders from the parts directory on the CNC or
the host computer.
Deleting Folders
Select whether the CNC operator can delete folders from the parts directory on the CNC
or the host computer.
Deleting Files
Select whether the CNC operator can delete folders from the parts directory on the CNC
or the host computer.
Mapping Drives
Select whether the CNC operator can map to external drives from the CNC through the
optional network.
Configuring Watch
Select whether the CNC operator can change the items in the Watch Window.
Adding Processes
Select whether the user can add new processes to the laser cut charts when enabled.
Removing Processes
Select whether the user can remove processes to the laser cut charts when enabled.
Force Simulation
Select On to put the CNC into simulation mode. This mode disables motion but
maintains CNC operation and I/O feedback.
Temperature
Select whether the internal CNC temperature is displayed in Fahrenheit or Celsius in the
Watch Window.
Note: This setting is not available on all CNC types and optional CNC hardware is
required.