Hypertherm Phoenix 8.0 - Manual (Page 515)

Automated Plasma Interface
508
Note: Screen information will vary depending on THC selection.
Cut Chart
The Cut Chart Database (cut process parameters) transmitted to the power supply is based on the
following eight process variables.
Material Type
The Material Type, such as Mild Steel, Stainless Steel or Aluminum, may be selected.
Specific Material
A custom database from the dropdown list may be selected. The factory default is None.
Current Settings
The appropriate current setting for the material thickness and material type may be selected.
Plasma / Shield Gases
The appropriate Plasma / Shield gases for the desired process may be selected.