Hypertherm Phoenix 8.0 - Manual (Page 224)

Library Shapes
217
Base Width
Enter the width of the base of the part.
Overall Height
Enter the height of the part from the base to the top.
Side Height
Enter the height of the right side of the part.
Concave Radius
Enter the radius of the concave portion of the part.
Lead-In/Lead-Out Length
Enter the appropriate value to ensure proper piercing (lead-in) and gas bleed-off (lead-
out) to obtain optimum cut quality.
The location for the lead-in and lead-out is fixed, but can be changed by using the
ShapeWizard and then saving the new shape to disk.
Part Type
Indicate whether you want to cut the part as a separate piece or a hole in a larger part.
Chain cut options are available for simple shapes that have external cut paths.