Comtech EF Data DMD20 - Manual (Page 95)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol Remote Operations
MN-DMDREMOTEOP Revision 9 1–85
<1> Installed Features 6 Bit 0 = CNC 10 Mbps Feature
Bit 1 = CNC 15 Mbps Feature
Bit 2 = CNC 20 Mbps Feature
Bit 3 = CNC 25 Mbps Feature
Bit 4 = CNC 30 Mbps Feature
Bit 5 = CNC 40 Mbps Feature
Bit 6 = CNC 52 Mbps Feature
Bit 7 = EBEM
0 = Feature Not Installed, 1 = Feature Installed
The features that are set refer to options purchased by the customer. These
could be a subset of the overall physical capabilities of the product.
The highest data rate feature that is set indicates the highest data rate the
product can attain. This is also true for the Turbo Codec rates.