Comtech EF Data DMD20 - Manual (Page 94)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol Remote Operations
MN-DMDREMOTEOP Revision 9 1–84
Query Response (6 Bytes)
<1> Installed Features 1 Bit 0 = 1 Mbps data rate
Bit 1 = 5 Mbps data rate
Bit 2 = 10 Mbps data rate
Bit 3 = 20 Mbps data rate
Bit 4 = Rx IF Band
Bit 5 = Rx L Band
Bit 6 = Tx IF Band
Bit 7 = Tx L Band
0 = Feature Not Installed, 1 = Feature Installed
<1> Installed Features 2 Bit 0 = Enhanced ASYNC Feature
Bit 1 = IDR Feature
Bit 2 = Sequential Feature
Bit 3 = Reed Solomon
Bit 4 = Custom Reed Solomon Feature
Bit 5 = IBS Feature
Bit 6 = Drop & Insert Feature
Bit 7 = AUPC Feature
0 = Feature Not Installed, 1 = Feature Installed
<1> Installed Features 3 Bit 0 = 8PSK Feature
Bit 1 = 16QAM Feature
Bit 2 = 5 Mbps Turbo Codec Feature
Bit 3 = 20 Mbps Turbo Codec Feature
Bit 4 = OM73 Feature
Bit 5 = DVB Feature
Bit 6 = EDMAC Feature
Bit 7 = 512 Kbps Data Rate
0 = Feature Not Installed, 1 = Feature Installed
<1> Installed Features 4 Bit 0 = 52 Mbps data rate (DMD1050, DMD2050,
DMD2050E and DMD 50 only)
Bit 1 = 52 MHz Turbo Codec Feature (DMD2050,
DMD2050E and DMD 50 only)
Bit 2 = FSK (DMD20LBST and OM20 only)
Bit 3 = 16APSK Feature (DMD2050E Only)
Bit 4 = TPC 7/8 short KHz Feature (Super Card Only)
Bit 5 = R11 Scrambler Feature
Bit 6 = Eth Wan Monitor Feature
Bit 7 = Spare
0 = Feature Not Installed, 1 = Feature Installed
<1> Installed Features 5 Bit 0 = 8QAM Feature
Bit 1 = LDPC 5 Mbps Feature
Bit 2 = LDPC 10 Mbps Feature
Bit 3 = LDPC 20 Mbps Feature
Bit 4 = CNC 512 Kbps Feature
Bit 5 = CNC 1 Mbps Feature
Bit 6 = CNC 2.5 Mbps Feature
Bit 7 = CNC 5 Mbps Feature
0 = Feature Not Installed, 1 = Feature Installed