Comtech EF Data DMD20 User Manual
Page 122
DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol
SNMP (MIB)
MN-DMDREMOTEOP Revision 9
2–26
t1esf(3),
pcm30(4),
pcm30c(5),
pcm31(6),
pcm31c(7),
slc96(8),
t1d4s(9),
t1esfs(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the demodulator insert mode. SLC-96 is not yet implemented and
is reserved for future use."
::= { radDmd20DemodNVStatus 11 }
radDmd20RxInsertMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the demodulator insert map. Current mapping of satellite channels
to insert terrestrial time slots. Valid insert channels are 1 through 31.
If the insert mode is either PCM-30 or PCM-30C, then the channel number
16 is invalid. It is used for signaling."
::= { radDmd20DemodNVStatus 12 }
radDmd20RxBufferClockSource OBJECT-TYPE
SYNTAX BufferClockSourceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active Rx Buffer Clock Source, Note: this is not necessarily the primary source"
::= { radDmd20DemodNVStatus 13 }
radDmd20RxBufferClockPolarity OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
inverted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects Rx buffer clock polarity."
::= { radDmd20DemodNVStatus 14 }
radDmd20RxBufferSize OBJECT-TYPE
SYNTAX INTEGER (0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects Rx buffer size in msecs."
::= { radDmd20DemodNVStatus 15 }
radDmd20RxDataPolarity OBJECT-TYPE
SYNTAX INTEGER {