Comtech EF Data DMD20 User Manual
Page 134
DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol
SNMP (MIB)
MN-DMDREMOTEOP Revision 9
2–38
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects Efficient D&I format Inband Rate."
::= { radDmd20DemodNVStatus 65 }
radDmd20RxRotationAmbiguity OBJECT-TYPE
SYNTAX INTEGER {
rotationAmbiguity0(1),
rotationAmbiguity1(2),
rotationAmbiguity2(3),
rotationAmbiguity3(4),
rotationAmbiguity4(5),
rotationAmbiguity5(6),
rotationAmbiguity6(7),
rotationAmbiguity7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the rotational ambiguity desired from modulation map"
::= { radDmd20DemodNVStatus 66 }
radDmd20RxRfmTimeConstant OBJECT-TYPE
SYNTAX TimeConstantType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets time constants in mSecs for the Rx Rfm Agc accumulator. There is one implied decimal
point. A value of 1000 corresponds to a 1.000 sec time constant"
::= { radDmd20DemodNVStatus 67 }
-- ----------------------------------------------------------------------------------------------------
-- Dmd20 demodulator volatile status information.
radDmd20RxAlarms1 OBJECT-TYPE
SYNTAX BITS {
rxFpgaFault(0),
carrierFault(1),
multiframeSyncFault(2),
frameSyncFault(3),
ibsBerFault(4),
satelliteAisFault(5),
dataActivity(6),
agcLevelFault(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit field. On startup, the agent initializes this to the value '00000000'B.
Activity/Lock: 1 = Pass, 0 = Fail
Alarm/Fault: 0 = Pass, 1 = Fail"
::= { radDmd20DemodStatus 1 }
radDmd20RxAlarms2 OBJECT-TYPE
SYNTAX BITS {