beautypg.com

Comtech EF Data DMD20 User Manual

Page 74

background image

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol

Remote Operations

MN-DMDREMOTEOP Revision 9

1–64

<1>

ES Baud

0 =150, 1 = 300, 2 = 600, 3 = 1200, 4 = 2400, 5= 4800,
6 = 9600, 7 = 19200, 8 = 38400, 9 = 57600, 10 =
115200

<1>

ES Data Bits

0 = 7 Bits, 1 = 8 Bits


Opcode: <2494h>

Query Demodulator’s Ethernet Terrestrial Interface Packet Status

Query Response (16 Bytes)

<2>

Ethernet Bridge PER
Mantissa

Bytes 1 - 2 = Binary value of Packet Error Rate

<1>

Ethernet Bridge PER
Exponent

Byte 3 = Binary exponent of Packet Error Rate

<4> Ethernet

Bridge

Packet Error Count

Binary value

<4> Ethernet

Bridge

Packet Total Count

Binary value

<1>

Ethernet Bridge Port
1 Status

0 = Down, 1 = Unresolved, 2 = 10 Mbps Half, 3 = 100
Mbps Half, 4 = 10 Mbps Full, 5 = 100 Mbps Full, 6 =
Port Not Used, 7 = 1000 Mbps Half, 8 = 1000 Mbps
Full

<1>

Ethernet Bridge Port
2 Status

0 = Down, 1 = Unresolved, 2 = 10 Mbps Half, 3 = 100
Mbps Half, 4 = 10 Mbps Full, 5 = 100 Mbps Full, 6 =
Port Not Used, 7 = 1000 Mbps Half, 8 = 1000 Mbps
Full

<1>

Ethernet Bridge Port
3 Status

0 = Down, 1 = Unresolved, 2 = 10 Mbps Half, 3 = 100
Mbps Half, 4 = 10 Mbps Full, 5 = 100 Mbps Full, 6 =
Port Not Used, 7 = 1000 Mbps Half, 8 = 1000 Mbps
Full

<1>

Ethernet Bridge Port
4 Status

0 = Down, 1 = Unresolved, 2 = 10 Mbps Half, 3 = 100
Mbps Half, 4 = 10 Mbps Full, 5 = 100 Mbps Full, 6 =
Port Not Used, 7 = 1000 Mbps Half, 8 = 1000 Mbps
Full

<1>

Ethernet Bridge WAN
Status

0 = Down, 1 = Unresolved, 2 = 10 Mbps Half, 3 = 100
Mbps Half, 4 = 10 Mbps Full, 5 = 100 Mbps Full, 6 =
Port Not Used, 7 = 1000 Mbps Half, 8 = 1000 Mbps
Full


Opcode: <2495h>

Query Demodulator’s CNC Status

Query Response (10 Bytes)

<4> Carrier-in-Carrier

Run

Time Delay

Delay in µsec X 10

<4> Carrier-in-Carrier

Run

Time Frequency
Offset

Offset in KHz X 10

<2> Carrier-in-Carrier

Ratio

Ratio in dB


Opcode: <2A00h>

Command a Demodulator’s Configuration

Command Data (148 Bytes)

<1>

Network Spec

0 = Closed Net, 1 = IDR, 2 = IBS, 3 = D & I, 5 = DVB
SAT, 11 = MIL-188-165A, 16 = RFM, 17 = Ebem

This manual is related to the following products: