Comtech EF Data DMD20 - Manual (Page 153)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol SNMP (MIB)
MN-DMDREMOTEOP Revision 9 2–57
DESCRIPTION
"Summary Status value provided by the BUC across the Fsk interface"
::= { radDmd20ModLbstStatus 5 }
radDmd20BucTemperature OBJECT-TYPE
SYNTAX RadTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temperature, in degrees C, as reported by the BUC across the Fsk interface.
There is an implied decimal point.
For example, a value of 300 represents a temperature of 30.0 C"
::= { radDmd20ModLbstStatus 6 }
radDmd20FskPassThruCmd OBJECT-TYPE
SYNTAX FskPassThruCmdType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command text to be passed to Fsk interface"
::= { radDmd20ModLbstStatus 7 }
radDmd20FskExecutePassThruCmd OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Any write to this object will force the value of the FskPassThruCmd
to be written out the fsk interface"
::= { radDmd20ModLbstStatus 8 }
radDmd20FskPassThruReply OBJECT-TYPE
SYNTAX FskPassThruReplyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fsk interface's most recent reply to previous Fsk pass thru command"
::= { radDmd20ModLbstStatus 9 }
-- ----------------------------------------------------------------------------------------------------
-- Dmd20 Demod Lbst nonvolatile status information.
radDmd20LbstRxDownlinkFrequencyHz OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects RF frequency in Hz steps. 2GHz to 99 GHz."
::= { radDmd20DemodLbstNVStatus 1 }
radDmd20LbstRxLoFrequencyHz OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects local oscillator frequency in Hz steps. 2GHz to 99 GHz."