Comtech EF Data DMD20 - Manual (Page 120)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol SNMP (MIB)
MN-DMDREMOTEOP Revision 9 2–24
configures many of the modem parameters. When a strap code is
entered, the demodulator is automatically configured for the
corresponding data rate, overhead, code rate, framing, descrambler
type, and demodulation."
::= { radDmd20DemodNVStatus 4 }
radDmd20RxInnerFecRate OBJECT-TYPE
SYNTAX INTEGER {
none(1), viterbi1x2(2), viterbi2x3(3),
viterbi3x4(4), viterbi5x6(5), viterbi7x8(6),
reserved7(7), sequential1x2(8), reserved9(9),
sequential3x4(10), reserved11(11), sequential7x8(12),
reserved13(13), reserved14(14), trellis2x3(15),
trellis3x4(16), trellis5x6(17), trellis7x8(18),
trellis8x9(19), comstream3x4(20), tpc793x2d(21),
tpc495x3d(22), tpc1x2(23), tpc3x4(24),
tpc7x8(25), tpc21x44(26),
tpc750(27), tpc875(28),
ldpc1x2(32), ldpc2x3(33), ldpc3x4(34),
ldpc4x5(35), ldpc5x6(36), ldpc8x9(37),
ldpc9x10(38), ldpc3x5(39)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects Rx code rate and type. The reserved selections are
unimplemented types reserved for future use."
::= { radDmd20DemodNVStatus 5 }
radDmd20RxModulationType OBJECT-TYPE
SYNTAX INTEGER {
qpsk(1),
bpsk(2),
psk8(3),
qam16(4),
oqpsk(5),
rfm(6),
qam8(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the demodulation type."
::= { radDmd20DemodNVStatus 6 }
radDmd20RxSatFraming OBJECT-TYPE
SYNTAX INTEGER {
framingNone(1),
framing96kIdr(2),
framingIbs(3),
framingEfAupc(4),
framingDvb(5),
framingEdmac(6),
framingScc(7),
framing96k(8),