Comtech EF Data DMD20 - Manual (Page 90)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol Remote Operations
MN-DMDREMOTEOP Revision 9 1–80
<1> Number Of Events Number of events to query, maximum events that can
be queried is 3
Query Response (1, 77, 153 or 229 Bytes)
<1> Number Of Events Number of events in response: 0 = no events, there is
no additional response data, 1 = 1 event, see event
data for additional response data, 2 = 2 events, see
event data for additional response data, event data will
repeat once, 3 = 3 events, see event data for additional
response data, event data will repeat twice
Event Data (76 Bytes Per Event)
<4> Event Number Actual event number since events were cleared
Events are cleared on a power cycle, via the front panel
when the “CLEAR” key is pressed using “ERASE
EVENTS” under the “MONITOR” menu or via the
remote port by using opcode 2C0Ah and selecting 2
delete all events
The event number listed here is the actual event
number since events were cleared. The event buffer
stores up to 100 events; once the 101st event occurs
the first event stored in the event buffer is event
number 2 and the last is event number is 101. As new
events occur they are appended to the end of the event
buffer and events at the beginning of the buffer are
dropped.
<2> Reserved Ignored
<1> Hour 0 – 23
<1> Minute 0 – 59
<1> Second 0 – 59
<1> Reserved Ignored
<1> Year 0 – 99
<1> Month 0 – 11
<1> Day 0 – 30
<3> Reserved Ignored
<58> Event ASCII character string, null terminated
<2> Reserved Ignored
Opcode: <2402h>
Query a Modem's Drop & Insert Map
Command Data (1 Byte)
<1> Requested map 0 = Drop active map, 1 = Insert active map, 2 = Drop
edit map, 3 = Insert edit map, 4 - 11 = User map #1
through #8, 12 - 19 = ROM maps #1 - #8
Query Response (31 Bytes)
<1> Requested map
number
0 = Drop active map, 1 = Insert active map, 2 = Drop
edit map, 3 = Insert edit map, 4 - 11 = User map #1
through #8, 12 - 19 = ROM maps #1 - #8
<30> Requested map (Mapping of Satellite channels 1 thru 30 to dropped or
inserted Terrestrial Timeslots (Terrestrial Timeslots =
1..31) (0 = Insert None))