Comtech EF Data DMD20 User Manual
Page 125
DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol
SNMP (MIB)
MN-DMDREMOTEOP Revision 9
2–29
radDmd20RxEscOverheadType OBJECT-TYPE
SYNTAX INTEGER {
voice(1),
data(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects IDR overhead type. This applies only if an IDR or IBS interface card is
installed and the receive mode is set to IDR mode. If not ignore."
::= { radDmd20DemodNVStatus 26 }
radDmd20RxEsc1GaindBX100 OBJECT-TYPE
SYNTAX RadESCGain
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the ESC receive channel #1 volume in dB. This applies only if an IDR or IBS
interface card is installed and the receive mode is set to IDR mode. If not ignore."
::= { radDmd20DemodNVStatus 27 }
radDmd20RxEsc2GaindBX100 OBJECT-TYPE
SYNTAX RadESCGain
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the ESC receive channel #2 volume in dB. This applies only if an IDR or IBS
interface card is installed and the receive mode is set to IDR mode. If not ignore."
::= { radDmd20DemodNVStatus 28 }
radDmd20RxTerrInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
g703BT1Ami(1),
g703BT1B8zs(2),
g703BE1(3),
g703BT2(4),
g703UE1(5),
g703UT2(6),
g703UE2(7),
rs422(8),
v35(9),
rs232(10),
hssi(11),
asi(12),
aasi(13),
m2p(14),
dvb(15),
ethernetBridge(25),
milStd188pt114A(26),
rs423(27),
g703UT3(32),
g703UE3(33),
sts1Unbal(34)
}
MAX-ACCESS read-write
STATUS current