Comtech EF Data DMD20 User Manual
Page 148
DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol
SNMP (MIB)
MN-DMDREMOTEOP Revision 9
2–52
"A bit field. On startup, the agent initializes this to the value '00000000'B.
0 = Pass, 1 = Fail"
::= { radDmd20CommonStatus 3 }
radDmd20CommonLatchedAlarms2 OBJECT-TYPE
SYNTAX BITS {
terrFpgaFault(0),
codecFpgaFault(1),
codecDeviceFault(2),
dmdPos1p5VoltAlarm (3),
bit4Reserved(4),
modPos1p5VoltAlarm(5),
pos3p3VoltAlarm(6),
pos20VoltAlarm(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit field. On startup, the agent initializes this to the value '00000000'B.
0 = Pass, 1 = Fail"
::= { radDmd20CommonStatus 4 }
radDmd20CommonPos5VDcX10 OBJECT-TYPE
SYNTAX RadVoltageLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"+5V voltage. Implied decimal point, 49 means 4.9Volts"
::= { radDmd20CommonStatus 5 }
radDmd20CommonPos12VDcX10 OBJECT-TYPE
SYNTAX RadVoltageLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"+12V voltage. Implied decimal point, 121 means 12.1Volts"
::= { radDmd20CommonStatus 6 }
radDmd20CommonNeg12VDcX10 OBJECT-TYPE
SYNTAX RadVoltageLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"-12V voltage. Implied decimal point and sign, 121 means -12.1Volts"
::= { radDmd20CommonStatus 7 }
radDmd20CommonFirmwareName OBJECT-TYPE
SYNTAX FirmwareNameType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the modem firmware name."
::= { radDmd20CommonStatus 8 }
-- ----------------------------------------------------------------------------------------------------
-- Dmd20 Trap definitions.