Comtech EF Data DMD20 - Manual (Page 100)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol SNMP (MIB)
MN-DMDREMOTEOP Revision 9 2–4
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION "EbNo alarm threshold. There is an implied decimal point."
SYNTAX INTEGER (0..990)
FirmwareNameType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "15a"
STATUS current
DESCRIPTION "This is the modem firmware name."
SYNTAX OCTET STRING (SIZE (16))
BufferClockSourceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A clock source for the Rx Buffer"
SYNTAX INTEGER {
externalScte(1),
internalSct(2),
externalBnc(3),
rxSat(4),
externalIdi(5)
}
RadTemperature ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-1"
STATUS current
DESCRIPTION "Temperature in tenths of a degree Celsius."
SYNTAX INTEGER (-25..75)
FskPassThruCmdType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "65a"
STATUS current
DESCRIPTION "This is an ascii message which will be received and then sent as an FSK
message"
SYNTAX OCTET STRING (SIZE (65))
FskPassThruReplyType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "256a"
STATUS current
DESCRIPTION "This is an ascii reply to an earlier FSK pass thru command"
SYNTAX OCTET STRING (SIZE (256))
-- ----------------------------------------------------------------------------------------------------
-- Dmd20 modem non-volatile status information.
radDmd20TxCarrierControl OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2),
auto(3),
vsat(4),
rts(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the carrier control mode."