Comtech EF Data DMD20 - Manual (Page 132)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol SNMP (MIB)
MN-DMDREMOTEOP Revision 9 2–36
::= { radDmd20DemodNVStatus 55 }
radDmd20RxSpectralMask OBJECT-TYPE
SYNTAX INTEGER {
intelsat035(1),
dvbSat025(2),
dvbSat035(3),
milStd188pt165A(4),
dvbSat020(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the receive spectral mask and roll off."
::= { radDmd20DemodNVStatus 56 }
radDmd20RxAdjacentCarrierType OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
highPower(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User indicates adjacent carrier as normal or high power.
Unit will increase or decrease post decimation gain appropriately."
::= { radDmd20DemodNVStatus 57 }
radDmd20RxForceAlarmTest OBJECT-TYPE
SYNTAX BITS {
forceMajorAlarmTest(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx forced alarms:
0=Do not force, 1=Force alarm"
::= { radDmd20DemodNVStatus 58 }
radDmd20NumRxBufferClockSources OBJECT-TYPE
SYNTAX Unsigned32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the number of clock sources to be considered for use"
::= { radDmd20DemodNVStatus 59 }
radDmd20RxBufferClockSource1 OBJECT-TYPE
SYNTAX BufferClockSourceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the primary Rx Buffer Clock Source"
::= { radDmd20DemodNVStatus 60 }