Comtech EF Data DMD20 User Manual
Page 126
DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol
SNMP (MIB)
MN-DMDREMOTEOP Revision 9
2–30
DESCRIPTION
"Selects the various interface types."
::= { radDmd20DemodNVStatus 29 }
radDmd20RxEsEnhancedEnable OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
enhanced(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the async mode. Enhanced mode is only valid in Closed Net mode."
::= { radDmd20DemodNVStatus 30 }
radDmd20RxEsSerialControlInterface OBJECT-TYPE
SYNTAX INTEGER {
rs232(1),
rs485(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the port type for enhanced async. This applies only if the async
mode is set to enhanced."
::= { radDmd20DemodNVStatus 31 }
radDmd20RxEsBaudRate OBJECT-TYPE
SYNTAX INTEGER {
baud150(1),
baud300(2),
baud600(3),
baud1200(4),
baud2400(5),
baud4800(6),
baud9600(7),
baud19200(8),
baud38400(9),
baud57600(10),
baud115200(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the baud rate for enhanced async. This applies only if the async
mode is set to enhanced."
::= { radDmd20DemodNVStatus 32 }
radDmd20RxEsBitsPerChar OBJECT-TYPE
SYNTAX INTEGER {
seven(1),
eight(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION