Comtech EF Data DMD20 - Manual (Page 124)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol SNMP (MIB)
MN-DMDREMOTEOP Revision 9 2–28
radDmd20RxDifferentialDecoder OBJECT-TYPE
SYNTAX ControlType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disables/enables differential decoder"
::= { radDmd20DemodNVStatus 20 }
radDmd20RxBpskSymbolPairingSwap OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
swapped(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects symbol pairing."
::= { radDmd20DemodNVStatus 21 }
radDmd20RxT1E1FrameSource OBJECT-TYPE
SYNTAX INTEGER {
internal(1),
external(2),
idiDdoLoopBack(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This applies only if an IDR or IBS interface card is installed."
::= { radDmd20DemodNVStatus 22 }
radDmd20RxExtClockSource OBJECT-TYPE
SYNTAX BufferClockSourceType
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Formerly, selected the external clock source"
::= { radDmd20DemodNVStatus 23 }
radDmd20RxCarrierSweepRange OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value will used as a negative and positive limit
Example: 25 implies [-25 .. +25]"
::= { radDmd20DemodNVStatus 24 }
radDmd20RxCarrierLevelLimitdBmX100 OBJECT-TYPE
SYNTAX INTEGER (30..90)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects lower level limit in 1 dB steps, implied sign"
::= { radDmd20DemodNVStatus 25 }