Comtech EF Data DMD20 - Manual (Page 164)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol Web Browser
MN-DMDREMOTEOP Revision 9 3–2
3.2 Configuring Your PC
An example of the GUI layout is shown in Figure 3-1, showing the location and labeling of the
Interface. The graphical user interface is designed to replicate the front panel. For users familiar
with the front panel interface adjusting to the GUI interface should be seamless. The GUI
Interface is divided into four functional areas: the Front Panel Display simulation, Gel-tab area,
information/data entry and product information and contact area.
Figure 3-1 Web User Interface
Table 3-1
Item
Number
Description Function
1 Product Name This describes what product is that the interface
is connected to.
2 Product Name/Location This can be used by the user to identify the unit.
3 Alarm and Monitor Displays fault status and performance monitoring
of unit.
4 Gel-Tab Area This area allows access to data and control input
of unit. Moving the cursor across the Gel-Tabs
drop down menus appear and allow editing of the
data entry area.
5 Data Entry Area Parameter editing is done in this area.