Comtech EF Data DMD20 User Manual
Page 119
DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol
SNMP (MIB)
MN-DMDREMOTEOP Revision 9
2–23
STATUS current
DESCRIPTION
"A bit field. On startup, the agent initializes this to the value '00000000'B.
Activity/Lock: 1 = Pass, 0 = Fail
Alarm/Fault: 0 = Pass, 1 = Fail"
::= { radDmd20ModStatus 9 }
-- ----------------------------------------------------------------------------------------------------
-- Dmd20 demodulator non-volatile status information.
radDmd20RxNetworkSpec OBJECT-TYPE
SYNTAX INTEGER {
closednet(1),
idr(2),
ibs(3),
dropInsert(4),
dvbSat(5),
milStd188pt165A(6),
rfm(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the demodulator's mode of operation. The mode sets a
number of parameters within the demodulator to meet a set of
specifications. The purpose is to eliminate additional
commands and compatibility problems."
::= { radDmd20DemodNVStatus 1 }
radDmd20RxCarrierFrequencyHz OBJECT-TYPE
SYNTAX Unsigned32 (50000000..180000000|950000000..2050000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects IF frequency in Hz steps. The range is 50 MHz to 180 MHz
for the 70/140 MHz type modems and 950 MHz to 2050 MHz for the
LBand modems."
::= { radDmd20DemodNVStatus 2 }
radDmd20RxTerrDataRateHz OBJECT-TYPE
SYNTAX Unsigned32 (4800..52000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the data rate in BPS. The data rate minimum is 4800 bps.
It varies based on modulation and code rate.
Please refer to the Dmd product specifications manual
for maximum Data Rate Limits."
::= { radDmd20DemodNVStatus 3 }
radDmd20RxStrapCode OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the demodulator strap code. This is a quick set key that