Comtech EF Data DMD20 - Manual (Page 138)

DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol SNMP (MIB)
MN-DMDREMOTEOP Revision 9 2–42
externalBncActivity(1),
satelliteClockActivity(2),
externalIdiClockActivity(3),
externalReferenceActivity(4),
hsReferenceActivity(5),
bit6Reserved(6),
ebnoFault(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit field. On startup, the agent initializes this to the value '00000000'B.
0 = Pass, 1 = Fail"
::= { radDmd20DemodStatus 11 }
radDmd20RxLatchedAlarms5 OBJECT-TYPE
SYNTAX BITS {
trellisDecoderLock(0),
ifecLockFault(1),
insertSignalingFault(2),
tpcConflict(3),
bit4Reserved(4),
bit5Reserved(5),
dvbFrameFault(6),
bit7Reserved(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit field. On startup, the agent initializes this to the value '00000000'B.
0 = Pass, 1 = Fail"
::= { radDmd20DemodStatus 12 }
radDmd20RxBerEbnoStatus OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit field. On startup, the agent initializes this to the value '00000000'B
Bit 0 = Raw BER and corrected BER status. 1 = Valid
Bit 1 = Test BER status 1 = Valid
Bit 2,3 = EbNo status
0 = EbNo invalid
1 = EbNo valid
2 = EbNo is smaller than indicated value
3 = EbNo is greater than indicated value
Bit 4..7 = Reserved"
::= { radDmd20DemodStatus 13 }
radDmd20RxEbno OBJECT-TYPE
SYNTAX EbnoType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimated EbNo as seen by the demodulator, 2 implied decimal places."
::= { radDmd20DemodStatus 14 }