Comtech EF Data DMD20 User Manual
Page 155
DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol
SNMP (MIB)
MN-DMDREMOTEOP Revision 9
2–59
::= { radDmd20DemodLbstNVStatus 8 }
radDmd20LbstRxCurrentLowerThreshold OBJECT-TYPE
SYNTAX RadCurrentLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LNB Low current draw alarm threshold. There is an implied decimal point."
::= { radDmd20DemodLbstNVStatus 9 }
radDmd20LbstRxCurrentUpperThreshold OBJECT-TYPE
SYNTAX RadCurrentLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LNB Hi current draw alarm threshold. There is an implied decimal point."
::= { radDmd20DemodLbstNVStatus 10 }
-- ----------------------------------------------------------------------------------------------------
-- Dmd20 Demod Lbst volatile status information.
radDmd20LbstRxLnbVoltageX10 OBJECT-TYPE
SYNTAX RadVoltageLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LNB voltage. Implied decimal point, 181 means 18.1Volts"
::= { radDmd20DemodLbstStatus 1 }
radDmd20LbstRxLnbCurrentX1000 OBJECT-TYPE
SYNTAX RadCurrentLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LNB current. Implied decimal point, 498 means 0.498Amps"
::= { radDmd20DemodLbstStatus 2 }
-- ----------------------------------------------------------------------------------------------------
-- DMD20 MIB conformance
radDmd20ModNVStatusGroup OBJECT-GROUP
OBJECTS {
radDmd20TxCarrierControl,
radDmd20TxNetworkSpec,
radDmd20TxCarrierLeveldBmX100,
radDmd20TxCarrierFrequencyHz,
radDmd20TxTerrDataRateHz,
radDmd20TxStrapCode,
radDmd20TxInnerFecRate,
radDmd20TxModulationType,
radDmd20TxSatFraming,
radDmd20TxOuterFecEnable,
radDmd20TxOuterFecRate,
radDmd20TxInterleaverDepth,
radDmd20TxDropMode,
radDmd20TxDropMap,