Comtech EF Data DMD20 User Manual
Page 111
DMD20/DMD50/DMD2050/DMD2050E/DMD1050/OM20 Remote Protocol
SNMP (MIB)
MN-DMDREMOTEOP Revision 9
2–15
dataAISRequest(4),
yellowAlarm(5),
ibsPromptAlarm(6),
ibsServiceAlarm(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx forced backward alarms:
Bit 0 = IDR and IBS backward alarm 1
Bit 1 = IDR only backward alarm 2
Bit 2 = IDR only backward alarm 3
Bit 3 = IDR only backward alarm 4
Bit 4 = Tx data AIS request
Bit 5 = Yellow alarm (D&I mode)
0=Do not force, 1=Force alarm"
::= { radDmd20ModNVStatus 43 }
radDmd20TxDropStatusMask OBJECT-TYPE
SYNTAX BITS {
terrFrameFault(0),
terrMultiframeFault(1),
terrCrcFault(2),
bit3Reserved(3),
bit4Reserved(4),
bit5Reserved(5),
bit6Reserved(6),
bit7Reserved(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Alarm mask:
Bit 0 = Terrestrial frame lock fault (all modes)
Bit 1 = Terrestrial multi-frame lock fault (PCM-30 and PCM-30C only)
Bit 2 = Terrestrial CRC lock fault (PCM-30C and PCM-31C only)
0 = Mask, 1 = Allow"
::= { radDmd20ModNVStatus 44 }
radDmd20TxTerrestrialFraming OBJECT-TYPE
SYNTAX INTEGER {
noFraming(1),
dvb188(2),
dvb204(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the terrestrial framing."
::= { radDmd20ModNVStatus 45 }
radDmd20TxSpectralMask OBJECT-TYPE
SYNTAX INTEGER {
intelsat035(1),
dvbSat025(2),
dvbSat035(3),