Maxim Integrated MAXQ Family Users Guide: MAXQ2010 Supplement - Manual (Page 112)

MAXQ Family User’s Guide:
MAXQ2010 Supplement
21-1
SECTION 21: TIMER/COUNTER B MODULE (SPECIFIC TO MAXQ2010)
The MAXQ2010 provides three Type B timer/counter modules that operate as described in this section. Table 21-1 and
Table 21-2 list the associated pins and registers for these timer/counter modules.
Table 21-1. Type B Timer/Counter Input and Output Pins
Table 21-2. Type B Timer/Counter Control Registers
TIMER/COUNTER FUNCTION PIN MULTIPLEXED WITH GPIO
TB0A: Timer 0 I/O Pin A 67 P5.1
TB0B: Timer 0 I/O Pin B 68 P5.0
TB1A: Timer 1 I/O Pin A 25 P6.5
TB1B: Timer 1 I/O Pin B 28 P6.4
TB2A: Timer 2 I/O Pin A 23 P6.7
TB2B: Timer 2 I/O Pin B 24 P6.6
REGISTER ADDRESS FUNCTION
TB0R M4[00h]
Type B Timer/Counter 0 Capture/Reload Register. Holds the reload value in autoreload mode;
used to store capture values in capture mode.
TB0C M4[01h]
Type B Timer/Counter 0 Compare Register. This register is used for comparison against the TB0V
value when compare mode is enabled.
TB1R M4[02h]
Type B Timer/Counter 1 Capture/Reload Register. Holds the reload value in autoreload mode;
used to store capture values in capture mode.
TB1C M4[03h]
Type B Timer/Counter 1 Compare Register. This register is used for comparison against the TB1V
value when compare mode is enabled.
TB2R M4[04h]
Type B Timer/Counter 2 Capture/Reload Register. Holds the reload value in autoreload mode;
used to store capture values in capture mode.
TB2C M4[05h]
Type B Timer/Counter 2 Compare Register. This register is used for comparison against the TB2V
value when compare mode is enabled.
TB0CN M4[08h] Type B Timer/Counter 0 Control Register. Contains the control, mode, and interrupt bits.
TB0V M4[09h] Type B Timer/Counter 0 Value Register. Contains the current timer/counter value.
TB1CN M4[0Ah] Type B Timer/Counter 1 Control Register. Contains the control, mode, and interrupt bits.
TB1V M4[0Bh] Type B Timer/Counter 1 Value Register. Contains the current timer/counter value.
TB2CN M4[0Ch] Type B Timer/Counter 2 Control Register. Contains the control, mode, and interrupt bits.
TB2V M4[0Dh] Type B Timer/Counter 2 Value Register. Contains the current timer/counter value.