KEYENCE LS-7000 - Manual (Page 37)

2-1
Chapter 2
Easy Setting Guide
The LS-7000 Series is used for a variety of measurement
applications if the LS-7000 Series is set properly. This section
provides information on targets and settings for typical
applications respectively.
Measurement of Outer Diameter and Width
(with Single Measuring Head) ............................................. 2-2
Measurement of Outer Diameter and Width
(with Two Measuring Heads) ............................................... 2-3
Measurement of Outer Diameter and Width
(with Two Measuring Heads for Larger Objects) ................. 2-4
Measurement of Inner Diameter and Clearance ................. 2-5
Measurement of Outer Diameter and Eccentricity .............. 2-6
Measurement of Movement and Positioning ....................... 2-7
Measurement of Pitch ......................................................... 2-8