KEYENCE LS-7000 - Manual (Page 23)

1-9
1
Chapter 1 Getting Started
(14) Display selection key: Press this key to select the main display or sub
display when measuring. (Page 3-2, Switching
Display Screen)
(15) ZERO key: Press this key to select the auto zero function. (Page
3-6, Automatic Zero Function)
(16)
HOLD
key: Press this key to select the hold function. (Page 3-5,
Hold Function)
(17)
HI
,
GO
, and
LO
keys: Press these keys to make tolerance settings. (Page 4-
50, Limit Setting)
(18) and keys: Press these keys to select the set value or item.
(19) Output selection display: Indicates whether the measured value on the main
display is OUT1 or OUT2.
(20) Comparator result display: Displays the comparator result of the main display.
(21) Timing display: Lit when timing input into the main display turns ON.
Measuring Head
LS-7010
Multi-purpose
Mounting Holes
A fixture for targets can
be attached.
Transmitter (T Head)
Emits light for
measurement.
Receiver (R Head)
Receives light from
the transmitter.
Cover Glass
Mounting Holes
Used to mount the
measuring head.
Extension Cable
Connected to the controller.
TR Base
Used to mount the
transmitter and receiver.
TR Cables
Used to connect the transmitter