KEYENCE LS-7000 - Manual (Page 126)

5-12
Chapter 5 Environment Settings
5
■ Mutual Interference Prevention Function
This function prevents mutual interference that may result when two measuring heads
are located at right angles. With the function used, the LED light sources are turned
sequenced ON and OFF.
Note: If the mutual interference prevention function is used, the following settings
will change.
• The sampling cycle of measurement will be set to 1,200 times per second.
• The averaging number preset will be halved by the LS-7000 Series while in
operation.
Example: If it is set to 512 times, the number of actual averaging times will
be 256 times.
• The response delay time with the averaging number set to 1 will be the
same as that with the averaging number set to 2. If the averaging number
preset is 2 or over, there will be no difference in response delay time. (See
page 8-6)
1
Press the
ENT
key when the head display is on the screen.
2
Press the FUNC key.
3
Press the or key and make the setting.
The following displayed items can be selected.
Not set
Set
GO
GO
4
Press the
ENT
key.
The input item is entered and the head display appears again.
Beep
Take the following steps to activate the buzzer when control panel keys are pressed.
1
Press the
FUNC
key three times when the program display is on the screen.
2
Press the
ENT
key.
3
Press the or key and set the buzzer sound.
The following displayed items can be selected.
The buzzer turns ON.
The buzzer turns OFF. GO
GO
4
Press the
ENT
key.
The input item is entered and the BEEP display appears again.