KEYENCE LS-7000 - Manual (Page 119)

5-5
Chapter 5 Environment Settings
5
Details of Environment Settings
This section provides information on environment setting items and setting methods.
Program
The LS-7000 Series ensures ease of program settings or changes.
Possible Settings
• Program Selection (P-SELECT):
Select the program from the front panel or the rear termi-
nals.
• Copying Programs (P-COPY):
Program can be copied to other programs. Furthermore, a
selected program can be initialized.
• Resetting all programs (P-CLEAR):
All programs are initialized and returned to factory-set data.
■ Program Selection
Take the following steps to decide the selection method of the program number.
Setting Items
• Panel (PANEL):
The program number is selected through the control panel
or RS-232C interface.
• Terminal (TERMINAL): The program number is selected through the external input
terminals.
1
Press the
ENT
key when the program display is on the screen.
2
Press the or key and select the selection method.
The following displayed items can be selected.
PANEL
TERMINAL
GO
GO
3
Press the ENT key.
The input item is entered and the program display appears again.
■ Copying Programs
The contents of a program can be copied to another program. Furthermore, the se-
lected program can be initialized.
Initializing a Selected Program
A program number can be selected to be initialized. In this case, set “—” for the number
of the program to be copied and specify a program number for the destination program
number.