KEYENCE LS-7000 - Manual (Page 30)

1-16
1
Chapter 1 Getting Started
Cable between
controller and
measuring head
3
Connect the cable between the con-
troller and measuring head.
If only a single measuring head is used,
connect the cable to the HEAD1 connec-
tor.
4
Connect the power supply cable of
the AC power supply stand to the
controller.
5
Mount the stand unit to the base unit.
Mount the stand unit with the two screws
provided with the package.
(1) Lean the stand unit in the
front direction and insert
the tab.
(2) Lean the stand unit in the
direction indicated by the
arrow. Pay utmost attention so
that the connected cable will
not be caught by the stand unit.
(3) Secure these portions
with screws.