KEYENCE LS-7000 - Manual (Page 153)

7-11
Chapter 7 RS-232C
7
■ Program Number Selection
This command selects program numbers.
The command will be enabled if PANEL is
set as a P-SELECT environment setting
item.
Program No.
0~9, A~F
Command
Response
P W cr
P W , v cr
LS
Panel Lock ON/OFF
0 : OFF
1 : ON
2 : Confirm
Command
Response
LS
P L , w cr
cr P L , w
Program No.
0~9, A~F
Command
Response
LS
P R cr
P R , v cr
Area number
1 : AREA 1
2 : AREA 2
FOCUS output
0 : ON
1 : OFF
Area check output
0 : OFF
1 : ON
Command
Response
LS
I S , a cr
I S , x , y cr
■ Program Number Confirmation
This command is used to confirm the
program number that has been currently
set. The command will be enabled if PANEL
is set as a P-SELECT environment setting
item.
■ Panel Lock ON/OFF
This command sets the panel lock to ON or
OFF.
■ Function Output
This command makes it possible to monitor
the status of the FOCUS output and the
status of the area check output.