Figure 71 – Kontron TIGH2U Carrier Grade Server User Manual
Page 91
Kontron Carrier Grade Server TIGH2U
December 2009
Product Guide, rev.1.2
91
Server Component Replacements—TIGH2U Server
13. Push the SFP board toward the rear of the chassis to disengage the placement peg. (“C”)
14. Pull the SFP board up over the placement peg and lift it from the chassis. (“D”, “E”)
15. Remove the Intel
®
RAID Activation Key and DDR2 mini-DIMM if they are installed and set them
aside for re-installation on the replacement SFP board.
Figure 71.
Removing the Front Panel Board
TS000436
A
C
D
E
B