Dell POWEREDGE M1000E - Manual (Page 626)

624 Configuring Quality of Service
Changing Diffserv Admin Mode
1. Open the Diffserv Configuration page.
2. Turn Diffserv Admin Mode on or off by selecting Enable or Disable from the drop-down menu.
3. Click Apply Changes.
The Diffserv Admin Mode is changed, and the device is updated.
Displaying MIB Tables Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• QoS Commands
Class Configuration
Use the Diffserv Class Configuration page to add a new Diffserv class name, or to rename or delete an
existing class.
To display the
page, click Quality of Service > Differentiated Services > Class Configuration in the
tree view.
Figure 11-2. Diffserv Class Configuration
The Diffserv Class Configuration page contains the following fields:
• Class Name — Selects a class name to rename or delete. Click Add to set up a new class name.
•
Rename — Renames the class displayed when the box is checked and a new name is entered.
• Class Type — Lists the class types. Currently the hardware supports only the Class Type value All.