Dell POWEREDGE M1000E - Manual (Page 223)

Configuring System Information 221
Adding a New Community
1. Open the SNMPv1, 2 Community page.
2. Click Add.
The Add SNMPv1,2 Community page displays:
Figure 6-101. Add SNMPv1,2 Community
3. Complete the relevant fields.
In addition to the fields in the SNMPv1, 2 Community page, the Add SNMPv1,2 Community page
contains the All (0.0.0.0) field, which indicates that the community can be used from any
management station.
4. Click Apply Changes.
The new community is saved, and the device is updated.
Displaying Communities
1. Open the SNMPv1, 2 Community page.
2. Click Show All.
The Basic and Advanced Table page displays.