Dell POWEREDGE M1000E - Manual (Page 525)

Configuring Routing 523
– OSPF Type-1
– OSPF Type-2
– RIP
• Next Hop Interface — The outgoing router interface to use when forwarding traffic to the destination.
• Next Hop IP Address — The outgoing router IP address to use when forwarding traffic to the next
router (if any) in the path towards the destination. The next router is always one of the adjacent
neighbors or the IP address of the local interface for a directly attached network.
Displaying the Router Route Table using the CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• IP Routing Commands
Best Routes Table
Use the Router Best Routes Table page to display the best routes from the routing table.
To display the page, click Routing > Router > Best Routes Table in the tree view.
Figure 9-36. Router Best Routes Table