Dell POWEREDGE M1000E - Manual (Page 555)

Configuring Routing 553
Figure 9-58. Loopback Configuration - Add Secondary Address
8. Complete the Secondary Address, Secondary IP Address, and Secondary Subnet Mask fields.
9. Click the Add Secondary button. The secondary address is saved, and the webpage reappears showing
the primary and secondary loopback addresses.
Creating a New Loopback (IPv6)
1. Open the Loopbacks Configuration page.
2. Select Create from the Loopback drop-down menu.
3. Specify an ID to use in the Loopback ID field.
4. Click Apply Changes.
The Loopback ID field goes away, and the remaining loopback fields display.