Dell POWEREDGE M1000E - Manual (Page 583)

Configuring IPv6 581
Configuring a DHCPv6 Interface for Server Interface Mode Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• DHCPv6 Commands
DHCPv6 Server Bindings Summary
Use the Server Bindings Summary page to display all DHCPv6 server bindings.
To display the page, click IPv6 > DHCPv6 > Bindings Summary in the tree view.
Figure 10-14. Server Bindings Summary
The Server Bindings Summary page contains the following fields:
• Client Address — Specifies the IPv6 address of the client associated with the binding.
•
Client Interface — Specifies the interface number where the client binding occurred.
• Client DUID — Specifies client's DHCPv6 unique identifier.
•
Prefix - Specifies the type of prefix associated with this binding.
• Expiry Time — Specifies the number of seconds until the prefix associated with a binding expires.
• Valid Lifetime — Specifies the valid lifetime value in seconds of the prefix associated with a binding.