Dell POWEREDGE M1000E - Manual (Page 267)

Configuring Switching Information 265
Changing Administrative Port Control
1. Open the Dot1x Authentication page.
2. Click Show All.
The Dot1x Authentication Table displays.
3. Scroll to the right side of the table and select the Edit check box for each port to configure. Change
Admin Port Control to Authorized, Unauthorized, or Automode as needed for chosen ports. Only
MAC-Based and Automode actually uses dot1x to authenticate. Authorized and Unauthorized are
manual overrides.
4. Click Apply Changes.
Admin Port Control is updated for the specified ports, and the device is updated.
Enabling Dot1x Authentication Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• 802.1X Commands
Authenticated Users
The Authenticated Users page is used to display lists of ports that have authenticated users.
To display the Authenticated Users page, click Switching > Network Security > Authenticated Users in
the tree view.
Figure 7-3. Network Security Authenticated Users
The Authenticated Users page contains the following fields:
• Port — Displays the port used for authentication.
•
User Name — Specifies a user from the list of users authorized via the RADIUS Server.