Dell POWEREDGE M1000E - Manual (Page 315)

Configuring Switching Information 313
Displaying the STP Port Table and Configuring STP Port Settings
1. Open the STP Port Settings page.
2. Click Show All.
The STP Port Table displays.
Figure 7-40. STP Port Table
3. Use the Unit drop-down menu to view the STP Port Table for other units in the stack, if they exist.
4. To change the STP settings for one or more ports, select the Edit option for the port(s), configure the
desired settings, and then click Apply Changes.
STP LAG Settings
Use the STP LAG Settings page to assign STP aggregating ports parameters.
To display the STP LAG Settings page, click Switching > Spanning Tree > STP LAG Settings in the
tree view.