Dell POWEREDGE M1000E - Manual (Page 368)

366 Configuring Switching Information
Adding a New VLAN and Configuring its VLAN Querier Settings
1. Open the VLAN Querier page.
2. Click Add.
The page refreshes, and the Add VLAN page displays.
Figure 7-81. Add VLAN Querier
3. Enter the VLAN ID and, if desired, an optional VLAN name.
4. Complete the fields on the page as needed.
5. Click Apply Changes.
The VLAN Querier settings are modified, and the device is updated.
Displaying the VLAN Querier Summary Table
1. Open the VLAN Querier page.
2. Click Show All.
The VLAN Querier Summary Table displays.
Figure 7-82. VLAN Querier Summary Table
Configuring VLAN Querier Settings with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• IGMP Snooping Commands