Dell POWEREDGE M1000E - Manual (Page 269)

Configuring Switching Information 267
Viewing the Port Security Table
1. Open the Port Security page.
2. Click Show All.
The Port Security Table displays.
Figure 7-5. Port Security Table
3. Use the Unit drop-down menu to view the Port Security Table for other units in the stack, if they exist.
Defining Multiple Locked Ports
1. Open the Port Security page.
2. Click Show All.
The Port Security Table displays.
3. Click Edit for each port whose parameters are to be changed.
4. Fields can now be edited as needed for these ports.
5. Click Apply Changes.
The changes are made to the Port Security table, and the device is updated.
Configuring Port Security with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• Address Table Commands
IP ACL Configuration
Access control lists (ACL) allow network managers to define classification actions and rules for specific
ingress ports. Your switch supports up to 100 ACLs. However, the hardware resources are limited and may
not be able to fully support 100 completely populated ACLs.