Dell POWEREDGE M1000E - Manual (Page 684)

682 Configuring IP Multicast
• Received Bad Routes — The number of invalid routes received on the selected interface.
• Sent Routes — The number of routes sent on the selected interface.
Neighbor Parameters
• Neighbor IP — The IP address of the neighbor whose information is displayed.
• State — The state of the specified neighbor router on the selected interface, either active or down.
•
Neighbor Uptime — The DVMRP uptime for the specified neighbor on the selected interface. This is
the time since the neighbor entry was learned.
• Neighbor Expiry Time — The DVMRP expiry time for the specified neighbor on the selected
interface. This is the time left before this neighbor entry ages out, and is not applicable if the neighbor
router's state is down.
• Generation ID — The DVMRP generation ID for the specified neighbor on the selected interface.
• Major Version — The DVMRP Major Version for the specified neighbor on the selected interface.
• Minor Version — The DVMRP Minor Version for the specified neighbor on the selected interface.
•
Capabilities — The DVMRP capabilities of the specified neighbor on the selected interface.
• Received Routes — The number of routes received for the specified neighbor on the selected
interface.
• Received Bad Packets — The number of invalid packets received for the specified neighbor on the
selected interface.
• Received Bad Routes — The number of invalid routes received for the specified neighbor on the
selected interface.
Displaying DVMRP Configuration Summary using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• DVMRP Commands