Dell POWEREDGE M1000E - Manual (Page 271)

Configuring Switching Information 269
Figure 7-7. Add IP ACL
3. Enter the desired ACL Name in the related entry field .
4. Click Apply Changes.
The IP-based ACL is added, and the device is updated.
Removing an IP-based ACL
1. Open the IP ACL Configuration page, and select the ACL to be deleted from the IP ACL drop-down
menu.
2. Check the Remove ACL check box.
3. Click Apply Changes.
The IP-based ACL is removed, and the device is updated.
Displaying IP ACLs
1. Open the IP ACL Configuration page.
2. Click Show All.
All IP ACLs and their related data display in the IP ACL Table.
Figure 7-8. IP ACL Table
Adding an IP-based ACL Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• ACL Commands