Dell POWEREDGE M1000E - Manual (Page 723)

Configuring IP Multicast 721
PIM-SM Interface Summary
Use the PIM-SM Interface Summary page to display a PIM-SM interface and its settings. At least one
interface on this router must be set up as PIM-SM for this page to display.
To display the page, click Multicast > PIM-SM > Interface Summary in the tree view.
Figure 12-49. PIM-SM Interface Summary
The PIM-SM Interface Summary page displays the following fields:
• Interface — Select the interface for which data is to be displayed.
•
Mode — The administrative status of PIM-SM in the router: either Enable or Disable.
• Protocol State — The operational state of the PIM-SM protocol on the selected interface, either
Operational or Non-operational.
• IP Address — The IP address of the selected PIM interface.
•
Net Mask — The network mask for the IP address of the selected PIM interface.
• Designated Router — The Designated Router on the selected PIM interface. For point-to- point
interfaces, this object has the value 0.0.0.0.
• Hello Interval (secs) — The frequency at which PIM Hello messages are transmitted on the selected
interface.