Rockwell Automation 441-PEN25 Enpac Ex Data Collector - Manual (Page 98)

Publication GMSI00-UM001A-EN-E - February 2005
92 Collecting and Reviewing Data
6. For manual entry points, enter the magnitude value with the numeric key
pad.
7. If desired, tap the Notes button to assign inspection codes to each
point. The Enpac Ex unloads inspection codes when you unload the
unscheduled data to Emonitor. See Selecting Inspection Codes on
page 81.
8. Once the Enpac Ex collects the measurement, press READ/OK to
accept the measurement. The green LED "turns on" when the
measurement is complete. The measurement is stored as an off route
measurement at the current point.
The Off Route screen reappears.
9. Tap the Esc button to return to the Data Collection screen.
Creating and Collecting a User-Defined Point
The Off Route program also allows you to set up and collect any type of off
route measurement. The Enpac Ex keeps the user-defined parameters until
you collect another measurement point or tap the Default button on the
Offroute User screen.
This section discusses how to create and collect a user-defined measurement
point.
To create a user-defined point
1. Select Data Collection from the Main Menu and press the READ/OK
key. The Data Collection screen appears.
2. Select the route. The Enpac Ex always associates off route
measurements with a list.