Rockwell Automation 441-PEN25 Enpac Ex Data Collector - Manual (Page 85)

Publication GMSI00-UM001A-EN-E - February 2005
Collecting and Reviewing Data 79
2. Tap the Config button. The Instrument Configuration screen appears.
See Instrument Configuration Parameters on page 107 for a description
of the options.
3. Highlight the option and press the RIGHT ARROW key to open a
menu of choices.
4. Select the choice by pressing the arrow keys, tapping the choice on the
touchscreen with the stylus, or typing in a value using the numeric key
pad.
5. Press the LEFT ARROW key to save your selection.
6. When you are finished, tap the Apply button to return to the Data
Collection screen.
Collecting Route Data This section explains how to collect list (route) data using the Enpac Ex. Using
your predictive maintenance software, you can load a list to the data collector
to organize your data collection, then collect data for the measurement
definitions in the list (route). Once you have prepared the Enpac Ex for data
collection you are ready to select a route and collect data
.
To highlight an option:
• press the UP or DOWN
ARROW key
• tap the option on the
touchscreen with the stylus
TIP
If you do not use the predictive maintenance software to
create and load lists to the data collector, Enpac Ex
automatically creates a route named "Default Route" for
you to use to collect data.