Rockwell Automation 441-PEN25 Enpac Ex Data Collector - Manual (Page 24)

Publication GMSI00-UM001A-EN-E - February 2005
18 The Enpac Ex
Main Screens This section introduces you to the main screens that appear when operating
the Enpac Ex. There are many other screens that appear while operating the
Enpac Ex. These screen are described with the operation.
Main Menu
The Main Menu allows you to navigate to the different programs in the Enpac
Ex. Each option in the Main Menu allows you to complete different tasks,
such as collecting data, defining the setup options, and reviewing data.
To make a selection from the Main Menu, highlight the option and press either
of the READ/OK keys.
The standard options in the Main Menu include:
• Data Collection - The Data Collection option allows you to collect
both route and unscheduled (off route) data. Refer to Data Collection
Screen on page 20 for more information.
• Instrument Setup - The Instrument Setup option allows you to set up
global options for collecting data. Refer to Instrument Setup Screen on
page 19 for more information.
• Review Data - The Review Data option allows you to view any data
stored in the Enpac Ex. You can view the data on the screen or print it
using the RS-232 interface. Refer to Review Data Screen on page 21 for
more information.
To highlight an option:
• press the option number on
the numeric keypad
• press the UP or DOWN
ARROW key
• tap the option on the
touchscreen with the stylus