Rockwell Automation 441-PEN25 Enpac Ex Data Collector - Manual (Page 8)

Publication GMSI00-UM001A-EN-E - February 2005
2 Introduction
Using the Manual This manual introduces you to the Enpac Ex. It is intended for anyone using
Emonitor and the Enpac Ex to collect vibration data and perform vibration
analysis.
Organization
To help you navigate through this manual, it is organized in chapters based on
these tasks and topics.
Chapter 1 "Introduction" contains an overview of the manual, the Online
Help System, and Rockwell Automation Integrated Condition Monitoring
Technical Support services.
Chapter 2 "The Enpac Ex" describes the Enpac Ex data collector in detail and
covers the basic operations of the data collector.
Chapter 3 "Setting Up Measurements" describes setting up measurement
definitions in Emonitor for use with the Enpac Ex data collector. It also
covers lists, inspection codes, and alarms.
Chapter 4 "Loading and Unloading" describes loading lists and unloading data
with Emonitor and the Enpac Ex.
Chapter 5 "Collecting and Reviewing Data" contains all the tasks associated
with collecting data, including using the Enpac Ex to collect list data.
Appendix A "Specifications" lists the technical specifications for the Enpac
Ex.
Appendix B "Enpac Ex Parameters" provides a list and description of the
Enpac Ex parameters.
Appendix C "Frequently Asked Questions" contains answers to frequently
asked questions.
For definitions of terms used in this Guide, see the Glossary at the end of the
Guide.
Document Conventions
There are several document conventions used in this manual, including the
following:
The Enpac Ex is referred to as Enpac, instrument, or data collector
throughout this manual.