Rockwell Automation 441-PEN25 Enpac Ex Data Collector - Manual (Page 25)

Publication GMSI00-UM001A-EN-E - February 2005
The Enpac Ex 19
Instrument Setup Screen
The Instrument Setup screen allows you to set up global options for the Enpac
Ex, including date and time. The Enpac Ex displays the Instrument Setup
screen when you first power on the instrument or after you reboot or
hardware reset the Enpac Ex. You can also access this screen by selecting
Instrument Setup from the Main Menu.
To edit an option in this screen, follow these steps.
1. Highlight the option and press the RIGHT ARROW key to open a
menu of choices. Below is an example of the timeout options.
2. Select the choice by pressing the arrow keys, tapping the choice on the
touchscreen with the stylus, or typing in a value using the numeric key
pad.
3. Press the LEFT ARROW key to save your selection.
When you are finished, tap the Apply button to return to the Main Menu. For
a list and description of the Instrument Setup parameters, see “Instrument
Setup Parameters” on page 105.
To highlight an option:
• press the UP or DOWN
ARROW key
• tap the option on the
touchscreen with the stylus