Rockwell Automation 2364F Regenerative DC Bus Supply Unit (RGU) - Manual (Page 198)

Publication 2364F-5.01– October 2003
D-54 Programming Parameters
293
Trend 1 Input Indirect
[Trend In Ind]
This parameter designates the parameter to be
output when Trend 1 is triggered.
The source parameter defined here is passed to
the output (P304) when the trending operation is
evaluated as true.
Parameter Type Sink (Read/Write)
Display Units Parameter Number
Drive Units Display Units * 1
Factory Default 0 (no selection)
Minimum Value 0
Maximum Value Maximum Defined Parameter Number
Related Parameters P294 to P304 (See P298)
294
Trend 1 Operand Indirect X
[Trend X Ind]
This parameter designates a source parameter to
be analyzed in the Trend 1 evaluation. The
source value is masked with the trend Y value
(P296 or P297). P295 (Trend 1 X Value) is used
as the trend X operand when this parameter is
zero (default).
Parameter Type Sink (Read/Write)
Display Units Parameter Number
Drive Units Display Units * 1
Factory Default 0 (disabled, P295 enabled)
Minimum Value 0
Maximum Value Maximum Defined Parameter Number
Related Parameters P293 to P304 (See P298)
295
Trend 1 X Value
[Trend X Value]
This parameter defines a constant to be masked
with the trend Y value (P296 or P297).
To use this parameter, the trend X indirect (P294)
must equal zero.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value -32768
Maximum Value 32767
Related Parameters P293 to P304 (See P298)
296
Trend 1 Operand Indirect Y
[Trend Y Ind]
This parameter designates a source parameter to
be analyzed in the Trend 1 evaluation. The
source value masks the trend X value (P294 or
P295).
P297 (Trend 1 Y Value) is used instead when this
parameter equals zero (default).
Parameter Type Sink (Read/Write)
Display Units Parameter Number
Drive Units Display Units * 1
Factory Default 0 (disabled, P297 enabled)
Minimum Value 0
Maximum Value Maximum Defined Parameter Number
Related Parameters P293 to P304 (See P298)
297
Trend 1 Y Value
[Trend Y Value]
This parameter defines a constant to mask the
trend X value (P294 or P295).
To use this parameter, the trend Y indirect (P296)
must equal zero.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value -32768
Maximum Value 32767
Related Parameters P293 to P304 (See P298)